Troughing Carrying Idler
2-roll, 3-roll and 5-roll sets that cradle the belt and carry bulk material.
- Trough angle: 20°, 30°, 35°, 45°
- Roller dia: 89 – 219 mm
- Belt width: 400 – 2400 mm
Home › Products › Conveyor Idler › Tanzania
🇹🇿 Supplying Tanzania • ISO 9001:2015 Certified
Long-Life Conveyor Idlers for Tanzania
Low-friction troughing, return, impact and self-aligning idler rollers with sealed bearings and precision tubes, manufactured in India and shipped to Dar es Salaam. Built for Tanzania's gold and coal mines, cement plants, sugar mills, farms and ports — dust, rain and heat included.
0Hour Quote Reply
0mm Max Roller Dia
0Years Experience
0% Tested Rollers
Conveyor Idlers for Tanzanian Industry
Every idler is engineered for your belt width, load and environment.
Flat Return Idler
Supports the empty return belt along the underside of the conveyor.
- Type: Single roll, V-return
- Roller dia: 63.5 – 168 mm
- Spacing: 3 m typical
Impact Idler
Rubber-ringed rollers that absorb shock at loading and transfer points.
- Ring: Rubber discs, Shore A 65
- Roller dia: 114 – 219 mm
- Use: Lump ore, Rock, Coal
Self-Aligning (Training) Idler
Pivoting frame that automatically steers the belt back to centre.
- Type: Carrying & Return
- Guide rollers: Vertical side rolls
- Benefit: Reduces edge wear
Rubber Disc Return Idler
Disc-spaced return rollers that shed sticky material and protect the belt.
- Disc: Rubber / Polyurethane
- Roller dia: 89 – 168 mm
- Use: Wet, sticky material
HDPE, Stainless & Special Idlers
Corrosion-proof, lightweight and low-noise idlers for harsh environments.
- Material: HDPE, SS 304/316, FRP
- Use: Fertilizer, Salt, Marine
- Custom: Built to drawing
Idler Specifications for Tanzania
Built for Tanzania's heat, dust, rain and long conveyor lines.
| Parameter | Specification |
|---|---|
| Roller Diameter | 63.5, 76, 89, 102, 114, 127, 139.7, 152, 159, 168, 194, 219 mm |
| Belt Width | 300 mm – 2400 mm (12" – 96") |
| Tube (Shell) | ERW / seamless steel tube, 3 – 6 mm thick, HDPE or SS on request |
| Shaft | EN8, C45, 20 – 60 mm, ground and turned |
| Bearings | Deep-groove 6204 – 6312 (SKF, FAG, NSK or equivalent), pre-lubricated |
| Sealing | Triple labyrinth, dust and water resistant |
| Trough Angle | 20°, 30°, 35°, 45° (2, 3 and 5 roll sets) |
| Runout & Rolling | Radial runout ≤ 0.5 mm, low rolling resistance |
| Climate Protection | Triple labyrinth seals, pre-lubricated sealed bearings and protective coatings for hot, humid, dusty and rainy-season conditions |
| Standards | CEMA B–E, DIN 22107, ISO 1537, IS 8598 |
| Export Packing | Palletised in cartons or wooden crates, container-ready; commercial invoice, packing list, certificate of origin and test reports; guidance on Tanzanian import requirements |
| Shipping | Via Indian ports to Dar es Salaam, then road or rail inland |
Supplying Tanzania from India
Direct manufacturer pricing, sea freight to Dar es Salaam and delivery support to your site.
Enquiry & Selection
Share belt width, load and environment. We recommend the right idler class.
Manufacturing
ISO 9001:2015 tube cutting, machining, welding and assembly.
Run & Seal Testing
Runout, rotation torque and sealing tests on every roller.
Export & Support
Palletised packing, documents and sea freight to Dar es Salaam, with inland transport and support.
Industries We Serve in Tanzania
Conveyor idlers for the sectors driving Tanzania's economy.
⛏ Gold & Mining🪨 Coal & Graphite💎 Gemstones🏗 Cement & Limestone🍬 Sugar Mills🌾 Maize & Grain🥜 Cashew & Coffee🧪 Fertilizer🚢 Ports & Shipping🚚 Logistics
📍 Dar es Salaam📍 Dodoma📍 Arusha📍 Mwanza📍 Mbeya📍 Tanga📍 Mtwara📍 Geita📍 Shinyanga📍 Morogoro📍 Moshi📍 Zanzibar
Also Supplying East & Southern Africa
Through Dar es Salaam and the central corridor we also support neighbouring markets.
🇰🇪 Kenya🇺🇬 Uganda🇷🇼 Rwanda🇧🇮 Burundi🇨🇩 DR Congo🇿🇲 Zambia🇲🇼 Malawi🇲🇿 Mozambique
Conveyor Idler in Tanzania – FAQ
Answers to common questions from Tanzanian buyers.
Do you supply conveyor idlers in Tanzania?
Yes. We manufacture conveyor idlers in Ahmedabad, India and export them to Tanzania by sea to Dar es Salaam port, with delivery to mines, plants and farms across the country.
Which idler type is best for Tanzanian mines?
Troughing carrying idlers with heavy-duty rollers suit gold, coal and gemstone mining, and impact idlers with rubber rings absorb shock at loading and transfer points. Send your belt width and material and we will recommend the idler class.
Are your idlers suitable for Tanzania's hot, humid and rainy conditions?
Yes. Our rollers use triple labyrinth seals, pre-lubricated sealed bearings and protective coatings to resist dust, water and humidity during the rainy season.
Which return idlers work for sticky material such as sugar or cement?
Rubber or polyurethane disc return idlers shed sticky and wet material and protect the belt, making them a good choice for sugar, cement and fertilizer applications.
Can you supply idlers with frames and brackets?
Yes. We supply rollers alone or complete idler sets with frames, brackets and stands, in 2-roll, 3-roll and 5-roll configurations.
Can you supply replacement idler rollers for my existing conveyor?
Yes. Roller diameter, length, shaft and bearing size are made to your drawing, sample or specification, so they fit existing conveyors.
How long does shipping from India to Tanzania take?
Sea freight from Indian ports to Dar es Salaam typically takes a few weeks depending on the shipping line. We share an estimated schedule with every quotation.
Do you handle export documents and customs support for Tanzania?
We provide commercial invoice, packing list, certificate of origin and test reports, and guide you on Tanzanian import requirements such as conformity verification where applicable.
How can I get a conveyor idler quotation for Tanzania?
Send idler type, roller diameter, belt width, quantity and site location through our form or email parth@dhanlaxmirubber.com. We reply within 24 hours.
Get Your Tanzania Quotation
Tell us your project — we reply within 24 hours.