Troughing Carrying Idler
2-roll, 3-roll and 5-roll sets that cradle the belt and carry bulk material.
- Trough angle: 20°, 30°, 35°, 45°
- Roller dia: 89 – 219 mm
- Belt width: 400 – 2400 mm
Home › Products › Conveyor Idler › Gujarat
📍 Made in Ahmedabad, Gujarat • ISO 9001:2015 Certified
Long-Life Conveyor Idlers for Gujarat Industry
Low-friction troughing, return, impact and self-aligning idler rollers with sealed bearings and precision tubes, manufactured at Vatva GIDC, Ahmedabad — close to Gujarat's industries for short transit and quick support. Built for ceramics, ports, cement, chemicals, salt, mining and agro plants, in hot, dusty, coastal and monsoon conditions.
0Hour Quote Reply
0mm Max Roller Dia
0Years Experience
0% Tested Rollers
Conveyor Idlers for Gujarat Industry
Every idler is engineered for your belt width, load and environment.
Flat Return Idler
Supports the empty return belt along the underside of the conveyor.
- Type: Single roll, V-return
- Roller dia: 63.5 – 168 mm
- Spacing: 3 m typical
Impact Idler
Rubber-ringed rollers that absorb shock at loading and transfer points.
- Ring: Rubber discs, Shore A 65
- Roller dia: 114 – 219 mm
- Use: Lump ore, Rock, Coal
Self-Aligning (Training) Idler
Pivoting frame that automatically steers the belt back to centre.
- Type: Carrying & Return
- Guide rollers: Vertical side rolls
- Benefit: Reduces edge wear
Rubber Disc Return Idler
Disc-spaced return rollers that shed sticky material and protect the belt.
- Disc: Rubber / Polyurethane
- Roller dia: 89 – 168 mm
- Use: Wet, sticky material
HDPE, Stainless & Special Idlers
Corrosion-proof, lightweight and low-noise idlers for harsh environments.
- Material: HDPE, SS 304/316, FRP
- Use: Fertilizer, Salt, Marine
- Custom: Built to drawing
Idler Specifications for Gujarat
Built for Gujarat's dust, heat, coastal air, monsoon and heavy-duty conveyor lines.
| Parameter | Specification |
|---|---|
| Roller Diameter | 63.5, 76, 89, 102, 114, 127, 139.7, 152, 159, 168, 194, 219 mm |
| Belt Width | 300 mm – 2400 mm (12" – 96") |
| Tube (Shell) | ERW / seamless steel tube, 3 – 6 mm thick, HDPE or SS on request |
| Shaft | EN8, C45, 20 – 60 mm, ground and turned |
| Bearings | Deep-groove 6204 – 6312 (SKF, FAG, NSK or equivalent), pre-lubricated |
| Sealing | Triple labyrinth, dust and water resistant |
| Trough Angle | 20°, 30°, 35°, 45° (2, 3 and 5 roll sets) |
| Runout & Rolling | Radial runout ≤ 0.5 mm, low rolling resistance |
| Climate Protection | Triple labyrinth seals, pre-lubricated sealed bearings and protective coatings for hot, dusty, coastal and monsoon conditions |
| Standards | IS 8598, CEMA B–E, DIN 22107, ISO 1537 |
| Packing & Documents | Palletised in cartons or wooden crates with tarpaulin wrapping for road transport; GST tax invoice, e-way bill support and test reports |
| Delivery | By road within Gujarat from Vatva GIDC, Ahmedabad; rail and port dispatch for large orders |
Delivery Across Gujarat
Direct factory pricing from Vatva GIDC, Ahmedabad with quick road delivery to your plant, port or mine.
Enquiry & Selection
Share belt width, load and environment. We recommend the right idler class.
Manufacturing
ISO 9001:2015 tube cutting, machining, welding and assembly.
Run & Seal Testing
Runout, rotation torque and sealing tests on every roller.
Delivery & Support
Palletised packing, GST invoice, road delivery across Gujarat and technical support.
Industries We Serve in Gujarat
Conveyor idlers for the sectors powering Gujarat's economy.
🧱 Morbi Ceramics & Tiles🚢 Ports: Mundra, Kandla, Pipavav🧪 Chemicals & Petrochemicals🏗 Cement & Limestone🧂 Salt & Minerals🌾 Groundnut, Cotton & Spices🧴 Fertilizer⚡ Power & Coal Handling🚗 Auto & Manufacturing🥛 Dairy & Food Processing
Coverage Across Gujarat
We supply conveyor idlers to every district and industrial estate in Gujarat.
Central Gujarat
North Gujarat
South Gujarat
Saurashtra
Kutch
East Gujarat
AhmedabadAmreliAnandAravalliBanaskanthaBharuchBhavnagarBotadChhota UdepurDahodDangDevbhoomi DwarkaGandhinagarGir SomnathJamnagarJunagadhKutchKhedaMahisagarMehsanaMorbiNarmadaNavsariPanchmahalPatanPorbandarRajkotSabarkanthaSuratSurendranagarTapiVadodaraValsadVav-Tharad
📍 Vatva GIDC📍 Naroda GIDC📍 Odhav GIDC📍 Sanand📍 Changodar📍 Bavla📍 Dholka📍 Kalol📍 Halol📍 Savli📍 Makarpura📍 Ankleshwar📍 Dahej📍 Jhagadia📍 Vapi📍 Sachin📍 Pandesara📍 Hazira📍 Morbi📍 Gondal📍 Metoda📍 Jamnagar📍 Sihor📍 Alang📍 Gandhidham📍 Mundra📍 Kandla📍 Pipavav
Conveyor Idler in Gujarat – FAQ
Answers to common questions from Gujarat buyers.
Are you a conveyor idler manufacturer in Gujarat?
Yes. Dhanlaxmi Conveyor Equipments LLP manufactures conveyor idlers and idler rollers at Vatva GIDC Estate, Ahmedabad, Gujarat and supplies plants across the state.
Do you supply conveyor idlers across all of Gujarat?
Yes. We deliver by road to plants, ports, mines and mandis in every district, from Ahmedabad and Gandhinagar to Surat, Vadodara, Rajkot, Morbi, Bhavnagar, Jamnagar and Kutch.
Which idlers suit Morbi ceramic and tile plants?
Sealed troughing and return idlers with dust-protected bearings suit clay, quartz and feldspar conveying, and impact idlers with rubber rings absorb shock at loading points. Send your belt width and material and we will recommend the idler class.
Which idlers suit ports like Mundra, Kandla and Pipavav?
Heavy-duty troughing idlers with triple labyrinth seals suit coal, fertilizer, grain and mineral handling, with HDPE, stainless steel or coated options for coastal and salt-air conditions.
Are your idlers suitable for coastal and salt-air conditions?
Yes. HDPE, stainless steel 304/316 and FRP idlers, plus protective coatings and sealed bearings, are available for salt, coastal and corrosive environments in Kutch, Saurashtra and South Gujarat.
Do you supply idlers for chemical and fertilizer plants in Dahej, Ankleshwar and Vapi?
Yes. Corrosion-resistant HDPE, stainless steel or coated idlers with sealed bearings are available for chemical, fertilizer and process industries.
Which idler type is best for cement and limestone conveyors?
Troughing carrying idlers with sealed bearings suit limestone, clinker and cement conveying, and impact idlers handle shock at loading and transfer points.
Which return idlers work for sticky or wet material?
Rubber or polyurethane disc return idlers shed sticky and wet material and protect the belt, making them a good choice for cement, fertilizer and agro applications.
Can you supply idlers with frames and brackets?
Yes. We supply rollers alone or complete idler sets with frames, brackets and stands, in 2-roll, 3-roll and 5-roll configurations.
Can you supply replacement idler rollers for my existing conveyor?
Yes. Roller diameter, length, shaft and bearing size are made to your drawing, sample or specification, so they fit existing conveyors. Our idlers follow IS 8598, CEMA, DIN and ISO standards.
Do you provide GST invoice and e-way bill?
We supply GST-compliant tax invoices with e-way bill support and test reports with each dispatch. Please confirm your billing details when you place an order.
Can I visit your factory at Vatva GIDC, Ahmedabad?
You are welcome to contact us to arrange a visit to our unit at Vatva GIDC Estate, Ahmedabad, to see our products and discuss your requirement.
How can I get a conveyor idler price in Gujarat?
Send idler type, roller diameter, belt width, quantity and site location through our form or email parth@dhanlaxmirubber.com. We reply within 24 hours with a quotation.
Get Your Gujarat Quotation
Tell us your project — we reply within 24 hours.